Apollo Cascade Spécifications télécharger pdf (Page 17)

Using Chlorine System

Start-Up:

1. Let water reach 90°F.

2. Add 1 tablespoons (14 grams) of Apollo Spas Chlorinating Granules per 200 gallons of water.

3. Add 1 tablespoon (14 grams) of Spa Oxidizing Shock per 200 gallons of water.

4. Wait 24 hours and then test and balance Alkalinity and pH levels of the water using Alkalinity Increaser, pH

Up or pH Down respectively.

Note: Have jets on high speed for 1-2 minutes when adding chemicals to mix the chemicals through the water

more effectively. Circulate water using ﬁltration mode for two additional hours.

After Each Use:

1. If you have an ozonator and/or use a Silver Sentinel Filter, add 1 teaspoon (4.75 grams) of Chlorinating

granules per person to the spa water (again, this is when you get out).

2. If you do not have an ozonator and/or use a Silver Sentinel Filter, add two teaspoons (9.5 grams) of Chlorine

Granules to the spa water.

3. If you do not use your spa for 3-4 days, add 1-2 tablespoons (4.75 - 9.5 grams) of Apollo Spas

Chlorinating Granules to the spa water for maintenance purposes.

Note: Have jets on high speed each time you add Chlorine to better mix it into the water.

Weekly:

1. Test water for Alkalinity and pH. Adjust as needed.

2. Add two (2) tablespoons (28 grams) of Spa Oxidizing Shock to spa water. Leave cover open and jets on high

speed for 20 minutes.

IMPORTANT: Shock signiﬁcantly reduces pH and TA. One hour after adding Spa Oxidizing Shock test and

adjust pH and TA as needed.

Using Bromine System:

Start-Up:

1. Fill ﬂoating dispenser with pucks and open setting #7.

2. Add 2 tablespoons (28 grams) of Spa Oxidizing Shock per 265 gallons of water.

3. Add 2 1/2 tablespoons (35 grams) of Chlorinating Granules per 265 gallons of water,

to establish a Bromide reserve.

4. Test the Bromide level. Once bromine reads within the ideal range (3-5 ppm) turn tablet dispenser down

to 2 or 3 or more depending on bather load.

Weekly:

1. Fill ﬂoating dispenser with pucks and reset the setting if necessary.

2. Add 2 tablespoons (28 grams) of Spa Oxidizing Shock per 265 gallons of water.

3. Wait at least one hour and add 1 tablespoon (14 grams) of Best Defense per 265 gallons of water.

IMPORTANT: Spa Oxidizing Shock signiﬁcantly reduces pH and TA. One hour after adding Spa Oxidizing

Shock test and adjust pH and TA as needed.

The use of Clariﬁers and Foam inhibitors are not recommended with a disposable ﬁlter.

1 2 ... 12 13 14 15 16 17 18 19 20

Pas de commentaire

Apollo Cascade Spécifications Page 17